PBM-614 • 6” to 14” PIPE - Air or Electric Motor

The PBM-614 beveling and facing machine comes with a torque accepting mandrel, built with a worm gear drive unit for extra torque to handle extra thick pipe walls.  This machine can bevel, face, and counter-bore up to 1.25” wall thickness.

PBM_614_Beveling Machine.pdf
Adobe Acrobat document [2.9 MB]
• Size range 6” to 14” Pipe   (152.4 mm - 355.6mm)
• Max wall thickness to 1.25" 
• Air Power requirements: 76 cfm at 90psi
• Lock in mandrel blades (no springs to lose)
• Adjustable keyway on machine and mandrel   
  (eliminates backlash and chatter)
• 3hp pneumatic motor 
• 190 lbs. approximate working weight
• Hardened mandrel 55 Rc. (less chance of gouging with metal chips)
• Three slots to do beveling, facing, deburring or counter-boring
• Single mandrel with mandrel blades to cover size ranges
• One cutter slot for heavy duty tool bits

Tool Bits for PBM-614

* TB-2902 Facing Bit (1" Height)
  TB-2903 Facing Bit (.875" Height)
  TB-2904 Facing bit (.750 Height)
  TB-2905 37.5 degree bevel bit (lower range)
* TB-2906 37.5 degree bevel bit (upper range)
  TB-2907 C-Bore 14.5 degree (lower range)
  TB-2908 C-Bore 14.5 degree (middle range)
  TB-2909 C-Bore 14.5 degree (upper range)
  TB-2910 C-Bore 10 degree (lower range)
  TB-2911 C-Bore 10 degree (middle range)
  TB-2912 C-Bore 10 degree (upper range)
  TB-2913 45 degree bevel bit (lower range)
  TB-2914 45 degree bevel bit (upper range)
  TB-8997 20 degree "J" bevel bit (lower range)
  TB-8998 20 degree "J" bevel bit (upper range)
  TB-2915 25 degree"J" bevel bit (lower range)
  TB-2916 25 degree "J" bevel bit (upper range)
  TB-2930 30 degree bevel bit (lower range)
  TB-2931 30 degree bevel bit (upper range)
  Heavy DutyTool Bits (For wall thickness 5/8" and over)
  TB-2924 37.5 degree bevel bit
  TB-2925 37.5 / 10 degree compound bevel bit
  TB-2926 30 degree bevek bit
  TB-2927 20 degree J-Bevel
  TB-2928 25 degree J-Bevel
* Tool bits included in kit



Print Print | Sitemap Recommend this page Recommend this page
© Otto Arc Systems

This website was created using 1&1 MyWebsite.