PWH-LD TIG (Large Diameter for Medium/Heavy Wall Pipe)

Adobe Acrobat document [68.3 KB]
track welding, large diameter, medium pipe, heavy wall pipe PWH-LC TIG Large Diameter for Medium or Heavy Wall

• TIG orbital welding system for medium and heavy wall pipe
• Track mounted welding head with single/dual wire feed
• Optional with hot wire TIG welding power source and hot wire TIG wire feeder for greater performance
• Welds large diameter and thick wall stainless steel pipe welding with standard J or compound preps
• Standard “V” prep on carbon steel only
• Recommended Power Unit = OW-ARC 250 or 400



Diameter Range mm (inches) 203.2 -1219.2mm (8" to 48")
OSC Width mm (inches) 50mm (2")
OSC Speed mm/min  (inches/min) 30mm (1.18")
AVC Speed mm/min (inches/min) 20-1000mm (.79"-39.4")
Arc Length Height mm (inches) 10 - 500mm (.39"-19.7")
Standard Cable Length L=15m (50')
Torch Angle -45°~ +45°
Tungsten Diameter (mm) 2.4, 3.2, 4.0mm (3/32", 1/8", 5/32")
Welding Speed mm/min (inches/min) 20-400mm/min  (.79"~15.7"/min)
Wire Feeding Speed (mm/min) Cold  95-1500mm  Hot 360-7800mm
Wire Feeding Speed (inches/min) Cold 3.7-59"  Hot 14.2" - 307"
Wire Diameter (mm/inches) 0.8, 0.9, 1.0, 1.2 (0.030", 0.035", 0.040", 0.045")
Carriage Weight kg (lbs) exc. wire and cables 9kg (20lbs)



For track sizes please contact us!




Print Print | Sitemap Recommend this page Recommend this page
© Otto Arc Systems

This website was created using 1&1 MyWebsite.